Local contractor in 92071

A water heater issue was identified, where it was not venting properly and experiencing backdrafting due to a negative rise. We assessed the situation and performed necessary adjustments to ensure proper venting. The function of the water heater has been restored, enhancing its performance and safety for the home in Santee.

A camera inspection of the sewer main was essential for the home in Santee. We performed a thorough inspection to assess the condition of the sewer line. This process allowed us to identify any potential issues that could impact the plumbing system. Our findings will guide any necessary future maintenance or repairs for the homeowner, ensuring optimal performance of their sewer system.

A leaking kitchen faucet prompted our visit. We inspected the angle stops and found issues causing low water pressure. We proceeded to service the faucet and resolve the leaks, restoring proper function to the system. The job was completed successfully in Santee, ensuring everything was in working order for future use.

A blockage in the sewer main was affecting the hallway bathroom. To address this issue, we conducted a thorough inspection and cleared the obstruction efficiently. The affected area was restored, ensuring proper drainage and functionality for the household. We utilized the right tools and techniques to complete the job successfully.

A slow-draining tub and shower in the hallway bathroom prompted us to take action. We effectively cleared a hair stoppage through the overflow plate, restoring proper drainage. This service enhances the bathroom's functionality and ensures a better experience for the household. Our goal is to maintain efficient plumbing systems for our clients in Santee.

A slow draining issue in the tub and shower prompted us to take action. We used a snake to clear the hair stoppage within the drain and overflow plate, ensuring proper flow restoration. Our efficient approach helped resolve the problem, allowing the homeowner to enjoy their plumbing system without further delays.

A leaking angle stop was identified in the cold water line. To resolve this issue, we replaced the existing sharkbite fitting with a new brass Dahl quarter turn shutoff. This solution ensures a reliable and efficient shutoff for the water supply. The work was completed effectively in Santee, CA, ensuring the plumbing system operates smoothly.

A backed-up kitchen drain line prompted our visit to the home in Santee. We addressed the stoppage by utilizing a snake cable through the exterior wall clean-out, effectively clearing the blockage. This service ensured that the kitchen drain is functioning properly once again.

A water leak from the base of the hallway bathroom toilet required our attention. We undertook the task of pulling and resetting the toilet to effectively seal any openings causing the leak. After completing the necessary adjustments, the toilet is now functioning properly, eliminating any issues during use. The job was completed successfully.

A plumbing upgrade was necessary to enhance water flow and functionality. We replaced both push-pull angle stops and supply lines with new quarter turn Dahl angle stops. Additionally, we installed the faucet that the customer provided. This work ensures a more reliable plumbing system for the home in Santee.

A warranty callback led us to address an issue with a Navien tankless water heater. We efficiently replaced the necessary components to resolve the error codes, ensuring the system operates smoothly. Our work enhances the reliability of the heating system, helping to maintain comfort for Ryan and Jennifer in Santee.

A sewer main stoppage was causing all drains to back up in the house. We cleared the blockage through the clean-out cap, restoring proper drainage throughout the home. This resolution ensures that all plumbing systems function effectively and prevents future interruptions. After completing the job, the homeowners could enjoy hassle-free use of their drainage facilities again.

A clogged drain in the upstairs tub and shower resulted in standing water. We resolved this issue by carefully clearing the obstruction through the overflow plate using a specialized cable. This effective intervention restored proper drainage, allowing for normal use of the tub and shower in Santee. The job was completed promptly and efficiently.

To ensure optimal performance, we conducted an annual descaling flush and maintenance for the Stiebel Eltron electric tankless water heater in Santee. This essential service helps prevent mineral buildup and prolongs the lifespan of the unit. Our work included thorough inspection and flushing to keep the system running efficiently. We appreciate the opportunity to assist with your water heating needs.

A routine maintenance session was conducted for a Navien tankless water heater. We performed an annual descaling flush to ensure its optimal performance, preventing mineral buildup and extending the unit's lifespan. The service was completed effectively in Santee, ensuring that the water heater operates efficiently for future use.

A reverse-osmosis system under the kitchen sink exhibited very low pressure, indicating a need for maintenance. We replaced the old cartridges, which the homeowner had supplied, ensuring the system returned to optimal performance. This service restored the water filtration process, providing clearer and cleaner water for everyday use in Santee.

A malfunctioning pressure reducing valve in the garage prompted us to replace it with a new 1” Zurn Wilkins 70XL PRV. This upgrade ensures optimal water pressure throughout the home in Santee. We completed the installation efficiently, guaranteeing reliable performance for all plumbing needs.

To enhance the plumbing system, we undertook a thorough review and revised the scope of work based on the specific requirements of the project. This involved careful assessment and necessary adjustments to ensure optimal functionality. Our goal was to provide effective solutions tailored to the needs observed at the site.

A pinhole leak was discovered in the 1/2” copper line supplying water to the backyard pool filler and irrigation system. To address this issue, we excavated the area, cut out the damaged section, and soldered in a new piece of type L copper piping. This solution ensures the pool and irrigation systems function properly again.

A broken hose bib and pool filler necessitated a water shutoff to the home. We assessed the situation and recommended replumbing with brass and PVC materials to ensure long-lasting functionality. This proactive approach will help prevent future issues and enhance the overall efficiency of the plumbing system.

A dripping faucet in the downstairs bathroom lavatory required immediate attention. We replaced both the hot and cold angle stops and completed a faucet rebuild to ensure proper functionality. This repair will effectively eliminate any leaks and enhance the performance of the faucet for continued use in Santee.

An older gas valve and uncoated gas line led to the need for replacement. We provided an estimate for the installation of new components to ensure safe and efficient operation of the dryer. Each part was carefully evaluated to meet code standards, ensuring a reliable and durable setup for future use.

A kitchen sink that was draining slowly and a malfunctioning garbage disposal prompted us to take action. We disassembled the drains to access and cable the copper drain line within the wall, ensuring that the plumbing was restored to proper functionality. The sink now drains efficiently, and the disposal operates smoothly once again.

A malfunctioning garbage disposal needed our attention after a glass breakage caused it to stop operating. We assessed the unit to confirm the issue and then proceeded to repair it, restoring its functionality. With the disposal now operational, the homeowner can once again use it without worry.

A water shutoff issue in Santee led us to repair the galvanized piping and hose bib in the backyard. Our work ensured that the plumbing system functions efficiently. We focused on restoring reliable water access, addressing all necessary repairs to prevent future issues. The job was completed successfully, ensuring the property's plumbing is in optimal condition.

A plumbing inspection revealed that the galvanized water piping had rust and multiple pinhole leaks below the outdoor hose bib. We excavated and exposed the piping up to the PVC transition, ensuring a clear path for repair. This work will help restore reliable water flow while addressing potential future issues.

A leak was detected in the ceiling drywall, identified by a noticeable water stain in the family room below the bathroom. We conducted a thorough leak search to locate the source of the issue and implemented the necessary measures for resolution. Our goal was to ensure the area was secure and free from water damage.

During our plumbing inspection at the property in Santee, we thoroughly examined the home and attic spaces to assess the scope of a complete water repipe. This assessment was essential to eliminate polybutylene piping, ensuring a reliable and safe plumbing system throughout the residence. Our findings will guide the next steps in the water repiping process.

A hot side slab leak was identified that caused heat on the bathroom floor. We capped the leaking 1/2” copper line and effectively rerouted the plumbing overhead through the attic using PEX-A piping. This solution prevents further leaks and ensures reliable water service.

A slow-draining tub on the second level prompted action. We removed the overflow plate and used our shower/tub snake, initially sending down 25 feet of cable, but found the clog was further down. Switching to a 40-45 foot cable, we successfully cleared the stoppage, retrieving hair and buildup. After testing the drain, water flowed smoothly. We sealed the overflow plate and provided a 30-day stoppage warranty.